The MZ-140D features two individual 140 Watt RMS Class D power amplifiers and each amplifier can be configured to run 70/100 Volt or at minimum 4Ohm impedance. Each amplifier is a zone, and there are front panel controls for volume, two band eq and source select per zone. There are five flexible input channels, each with a front panel mounted gain trim control. Dual combi microphone inputs allow two individual mics to be connected simultaneously both with auto or manual priority modes. Built in a full size 1U rack case, the unit is extremely robust with easily operable controls. Front ‘scribble’ strips allow the installer to easily identify each zone and input identification. The perfect installation amplifier for retail, leisure, café, bars and halls.

– 2 Zone amplifier
– 2x 140 Watts RMS power output
– Supports 70/100V or min 4 Ohm impedance speaker outputs (configurable per zone)
– 5 comprehensive audio input channels
– Independent bass and treble EQ adjustment on each zone
– Compact space saving 1U design (rack mountable)
– Universal ~100-240V worldwide operation
– Remote volume control capability using HH MZ-C2 module and standard ethernet cable

Features

System Type

• Zone Power Amplifier with Input Routing

Inputs

• CH1/2: Balanced XLR/6.3mm Jack Combi Socket
• CH3/4 L&R: Balanced 3.5mm Euroblock
• CH5: 3.5mm Stereo Aux and Stereo RCA

Outputs

• 2 Zone Power Amp Outputs via 5.08mm Euroblock

Indicators

• Power/Standby LED
• Input Signal Present and Peak LEDs
• Output Signal Present and Clip LEDs

Controls

• Adjustable Gain Control for Each Input
• Source Select and Volume Control for All Zones

Frequency Response

• LoZ Mode: 20Hz – 20kHz ±0.1dBu
• HiZ Mode: 80Hz – 20kHz ±0.1dBu

THD+N

• < 0.01% @ 0dBu In, Mid Volume
• < 0.008% @ +6dBu In, Maximum Volume

Signal-to-Noise Ratio (S/N)

• 110dB

Noise Floor

• < -70dBu (Unmuted)
• < -110dBu (Muted)

Crosstalk

• < -95dB Between Channels, Maximum Volume

Emergency Override

• Balanced 3.5mm Euroblock Connector for Overriding Normal Inputs

Lineout

• 3.5mm Euroblock Line Level Output Follows Zone 1, Useful for System Expansion

Other Controls

• CH1/2 Mic/Line Level
• Phantom Power
• High and Low Impedance Settings for Each Zone
• Power Saving Mode
• Front Panel Lock

DSP

• ORIGIN Advanced Multicore Platform

EQ

• Each Zone: Bass and Treble Shelving Control with a Low Pass Filter Mode
• CH1/2: Switchable High Pass Filter

Power Consumption

• 17W Idle
• 150W Typical
• 200W Max
• 0.4W Standby

Unit Dimensions (HxWxD)

• 44 x 483 x 417mm (1.7″ x 19″ x 16.4″)

Unit Weight

• 3.9kg (8.6 lbs)

Carton Dimensions (HxWxD)

• 150 x 630 x 510mm (5.9″ x 24.8″ x 20.1″)

อุปกรณ์เสริม

• Rack Mounting Kit
• Euroblock Connectors:
  • 4 x 3.5mm (3-Way)
  • 2 x 3.5mm (5-Way)
  • 1 x 5.08mm (6-Way)
• IEC Mains Lead
• HH User Manual Download Card